Mustang Exhaust - The Different Components

The most common alteration done to a mustang next to buying new wheels is upgrading the exhaust. Whether you are exchanging your mid-pipes or getting a whole new system, one thing is constant: mustang owners want great-sounding exhaust systems that lasts. This can be done by improving the parts of your exhaust. So, what are the different parts of the mustang exhaust?

The Mustang exhaust system is much more intricate than a few pieces of metal connected with bolts. There are many different functions performed by the mustang exhaust, the following being among the most important. They blow the hot air emitted by your engine away from the car. They reduce harmful emissions and limit the output of noise. The exhaust system is integral in increasing airflow through the engine. The faster air flow increases through the engine, the better your car performs.

How does the exhaust accomplish this? It is accomplished by pushing the gases that come from the engine through the pipes and muffler, on its way out of the car. There are three components in the mustang exhaust system. Every Mustang has the same set-up, no matter when it was made. I recommend strongly that you upgrade the headers and change to cat-back exhaust, which will not only improve your performance, but also the sound level and fuel efficiency often times.

The manifolds are first of the components and are attached to the exhaust ports of the engine. Manifolds funnel exhaust gases from the cylinders to an exhaust passage mid-pipe. The manifolds are occasionally referred to as mustang headers, and although they perform the same functions, are not exactly the same thing. While a manifold usually has many holes coming together into a common chamber, headers generally have tubes that curve and join the exhaust ports to the exhaust pipe. This allows gases to easily glide into the pipe as opposed to smashing through the ports.

The next component is called the mid-pipe. Each and every mustang exhausts have a mid-pipe. This is where the gases go when they depart the manifold. The main purpose of having this is to equalize the exhaust pulses. They are the bursts of exhaust from the engine to the pipe which helps the system to work more efficiently, allowing the engine to produce more power.

The third component is known as the mustang catback, which is bolted on to the back of the catalytic converters. The entire assembly is made up of the mufflers and the tailpipes, this is the final place that the vicious gases created by the engine come to. There are many products available aftermarket for performance upgrading of headers, exhaust and intake, the best source would be to click the links that you find in this article or resource box.

Mustang headers are synonymous with manifolds and although they perform the same functions, they do not work in exactly the same way. Headers normally have curved tubes joining the exhaust ports to the exhaust pipe while the several holes of the manifold converge into a common chamber. The next component, which is something included in each and every mustang exhaust, is the mid-pipe. The third component is called the mustang catback. The catback bolts on at the back of the catalytic converters. The assembly consists of the mufflers and the tailpipes.

- Troy Perkins